Real Sound ZX15P Active 15″ Speaker

Key Features:

• 15-inch 2-way active speaker with a 700oz magnet and titanium driver.

• Maximum Power Output: 1600 watts.

• Bluetooth Connectivity for wireless audio streaming.

• DSP (Digital Signal Processing) for enhanced sound quality.

• Frequency Response: 40Hz to 20kHz.

• XLR and 1/4″ Combo Inputs: For microphone and line-level sources.

• XLR Line Output: For connecting additional speakers or devices.

• Line Level Control: Adjust the output level of the speaker.

• Mic/Line Switch: Toggle between microphone and line-level signals for different input devices.

User Instructions:

1. Setting Up the Speaker:

• Position the Speaker: Place the ZX15P on a stable surface or speaker stand for optimal sound distribution.

• Power Supply: Connect the speaker to a grounded electrical outlet using the AC power input (labeled “8” in the diagram). Ensure that the power switch (labeled “9”) is in the OFF position before connecting.

2. Connecting Audio Sources:

• Use the XLR or 1/4″ Combo Input (labeled “5”) for connecting audio sources like microphones, instruments, or other audio equipment.

• For line-level signals, ensure the Mic/Line Switch (labeled “6”) is set to the Line position.

• For microphones, set the switch to the Mic position to optimize the input.

3. Adjusting Volume:

• Line Level Control (labeled “7”) can be used to adjust the overall volume output of the speaker. Begin with a low level and gradually increase to the desired volume.

4. Wireless Audio Streaming (Bluetooth):

• Pair the speaker with a Bluetooth-enabled device (such as a smartphone or laptop) to stream music wirelessly. Make sure the Bluetooth power switch (labeled “2”) is ON.

5. Powering On/Off:

• To turn the speaker ON, set the power switch (labeled “9”) to the ON position.

• When turning off, switch it back to OFF to ensure safe power-down.

6. Additional Output:

• If you need to connect additional speakers, use the XLR Line Output (labeled “4”) to send audio from the ZX15P to another speaker or audio system.

Safety Precautions:

• Caution: Always ensure the speaker is turned off before making any connections.

• Protective Grounding: Confirm the grounding system is intact to prevent electrical shocks.

• Do Not Open the Speaker: Opening the unit could expose you to dangerous electrical components. Always seek professional assistance if servicing is required.

Operating Conditions:

• This speaker is suitable for use in environments with standard temperature and humidity levels. Avoid exposing it to moisture, extreme temperatures, or direct sunlight to ensure long-lasting performance.

Troubleshooting:

• No Sound: Check if the power is on, the volume is turned up, and the audio source is correctly connected.

• Distorted Sound: Ensure the audio source signal is within appropriate levels and that the speaker’s volume is not set too high.